Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 6

Step 6
Disconnect both of the following connectors from the logic board:
  • Disconnect both of the following connectors from the logic board:

  • Left fan cable.

  • Inverter cable.

  • Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.

  • When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可