跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Disconnect both of the following connectors from the logic board:
  • Disconnect both of the following connectors from the logic board:

  • Sleep sensor cable.

  • Power button cable.

  • Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.

  • When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可