跳转到主内容
英语
中文

正翻译步骤 13

步骤 13
As I mentioned in step 9, I was punished by the lack of threads in my new window regulator So I broke out my tap and die set, and checked the bolt thread pitch, which was metric M6 x 1.0 I didn't notice until I'd already slipped my new part into the door... I actually pulled it back out of the door to tap the four holes
Preparing new parts
  • As I mentioned in step 9, I was punished by the lack of threads in my new window regulator

  • So I broke out my tap and die set, and checked the bolt thread pitch, which was metric M6 x 1.0

  • I didn't notice until I'd already slipped my new part into the door... I actually pulled it back out of the door to tap the four holes

  • If your part also has a lack of threads in the holes, be sure to check it before you've put the clip through the pin, and reinstalled the track bolts etc

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可