跳转到主内容
英语
中文

正翻译步骤 12

步骤 12
Since you can't get the regulator out past the window track, it has to be detached temporarily It's held on by two 10mm bolts, which have fancy dimpled flat washers, and lock washers, I've circled them in green in the picture Remove those two bolts, which should give you enough movement to push that window track forward off the window a bit, then into the door a bit deeper
Front vertical window track
  • Since you can't get the regulator out past the window track, it has to be detached temporarily

  • It's held on by two 10mm bolts, which have fancy dimpled flat washers, and lock washers, I've circled them in green in the picture

  • Remove those two bolts, which should give you enough movement to push that window track forward off the window a bit, then into the door a bit deeper

  • At this point it should be possible to pull out the window regulator, angling it as you go to avoid jamming on things

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可