跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 21

步骤 21
Now you can add the sling adapter and buffer-tube to the back of the AEG. Start with the sling adapter. The protruding section go into the AEG and the wiring goes threw the middle. Then with the wiring going threw the in slide the buffer-tube on to the back page of the body.
  • Now you can add the sling adapter and buffer-tube to the back of the AEG.

  • Start with the sling adapter. The protruding section go into the AEG and the wiring goes threw the middle.

  • Then with the wiring going threw the in slide the buffer-tube on to the back page of the body.

  • Then grab the large bolt with the washer piece attached and slide them into the back of the buffer-tube with the wring set underneath. Once the bolt is as far as it will go start screwing down the bolt using a long Philips screw driver.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可