注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。
正翻译步骤 5
步骤 5


-
Using the Phillips #00 screwdriver, unscrew the two 4.9 mm screws depicted here.
-
Next, remove the metal cover to expose the bluetooth card.
-
Gently fit the flat end of a spudger under the edge of the bluetooth card. Then, lightly pry up on this edge to release the card from the motherboard. (Refer to the third image)