跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
We go to remove the back cover and are foiled! No fingerprint scanner back here and there's still a cable primed to be ripped during opening. Looks like Huawei opted to mount the laser autofocus sensor on the rear case to stack it over the cameras. We finally get our hands on some screws and make quick work of the NFC antenna and motherboard shield.
  • We go to remove the back cover and are foiled! No fingerprint scanner back here and there's still a cable primed to be ripped during opening.

  • Looks like Huawei opted to mount the laser autofocus sensor on the rear case to stack it over the cameras.

  • We finally get our hands on some screws and make quick work of the NFC antenna and motherboard shield.

  • That's an NFC antenna, not a wireless charging coil—that crackable glass back is just for show, and for getting broken...

我们移除了背板,但我们还是失算了。虽然没有背部指纹识别的存在,但是我们还是在拆解背板的时候拆断了一根电缆

看起来华为选择将激光对焦传感器安装在背板上,以便其能堆叠在摄像头之上

我们终于找到了些螺丝,并快速地将NFC天线和主板屏蔽层拆除

这是NFC天线而不是无线充电线圈,这种玻璃背板的设计只是为了美观,而且容易碎裂···

在开源创作共享许可协议下,你的投稿已被许可