跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
法语

正翻译步骤 4

步骤 4
Peel off the adhesive on the left side of the battery holding the speaker wire down. Move the battery slightly to gain access to the battery plug, located on the left edge of the battery. Carefully unplug the battery by pulling the connector towards the battery.
  • Peel off the adhesive on the left side of the battery holding the speaker wire down.

  • Move the battery slightly to gain access to the battery plug, located on the left edge of the battery.

  • Carefully unplug the battery by pulling the connector towards the battery.

  • Pull parallel to the battery, not straight up.

  • Remove the battery.

  • It is normal for your battery to flex and bend a bit where the wider section meets the narrower section.

Retirez l'adhésif en maintenant en place le fil du haut-parleur droit.

Déplacez légèrement la batterie pour accéder au connecteur de la batterie.

Débranchez et retirez la batterie.

Il est normal que votre batterie fléchisse et se plie un peu là où la section la plus large rencontre la section la plus étroite.

Ne percez pas la batterie. Le contenu est dangereux et réagit dangereusement avec l'oxygène de l'air.

-[* black] Peel off the adhesive holding the right speaker wire down.
-[* black] Move the battery slightly to gain access to the battery plug.
-[* black] Unplug then remove the battery.
-[* icon_note] It is normal for your battery to flex and bend a bit where the wider section meets the narrower section.
-[* icon_caution] ***Do not puncture the battery***. The contents are hazardous and react dangerously with the oxygen in the air.
+[* black] Peel off the adhesive on the left side of the battery holding the speaker wire down.
+[* black] Move the battery slightly to gain access to the battery plug, located on the left edge of the battery.
+[* black] Carefully unplug the battery by pulling the connector towards the battery.
+ [* icon_caution] Pull parallel to the battery, not straight up.
+[* black] Remove the battery.
+ [* icon_note] It is normal for your battery to flex and bend a bit where the wider section meets the narrower section.

在开源创作共享许可协议下,你的投稿已被许可