跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 2

步骤 2
Once the adhesive sticks to the battery, you can't peel it off or reposition it—if you make a mistake, you'll have to start over with fresh adhesive strips. Double-check the orientation of the adhesive strips, and then stick them to the back side of your new battery.
  • Once the adhesive sticks to the battery, you can't peel it off or reposition it—if you make a mistake, you'll have to start over with fresh adhesive strips.

  • Double-check the orientation of the adhesive strips, and then stick them to the back side of your new battery.

  • Make sure the two shorter strips are nearest the battery cable connector.

  • Center the strips so that the two pairs of black tabs protrude evenly from each side of the battery.

当胶条贴在电池上后,您就不能将其揭掉再重新定位了——所以如果您操作失误的话,您就必须更换新的胶条了。

反复确认胶条的定位是否准确,然后将其粘在您的新电池的背面

确保两个短的胶条最接近电池排线处。

将胶条居中,确保两组黑色的突耳能够均匀地伸出电池两边。

在开源创作共享许可协议下,你的投稿已被许可