跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
One T5 (lower) and one PH00  (upper) screwdriver heads are needed to remove the battery's connector shield. Then use a spudger to pry the battery's connector from the motherboard. Be sure to pry with even pressure. Then use a spudger to pry the battery's connector from the motherboard. Be sure to pry with even pressure.
Disconnect Battery
  • One T5 (lower) and one PH00 (upper) screwdriver heads are needed to remove the battery's connector shield.

  • Then use a spudger to pry the battery's connector from the motherboard. Be sure to pry with even pressure.

上面的是 PH00 螺丝,下面的是 T5 螺丝;分别用对应的螺丝刀拧下来。

然后用撬棒把电池插头从主板上翘下来,翘的时候要均匀用力。

在开源创作共享许可协议下,你的投稿已被许可