跳转到主内容
英语
意大利语

正翻译步骤 1

步骤 1
Remove the three 8.4 mm #1 Phillips screws securing the heat sink to the logic board.
  • Remove the three 8.4 mm #1 Phillips screws securing the heat sink to the logic board.

  • Don't lose the springs held under each of the screws.

Svita le tre viti a croce Phillips #1 da 8,4 mm che fissano il dissipatore alla scheda madre.

Non perdere le molle presenti sotto ogni vite.

在开源创作共享许可协议下,你的投稿已被许可