跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive. Transfer the hard drive retaining posts to your new hard drive.
  • Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive.

  • Transfer the hard drive retaining posts to your new hard drive.

  • If desired, transfer the pull tab over to your new hard drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

  • If you upgraded your EFI Firmware ROM you can also perform an internet recovery.

从硬盘侧面卸下四个r 6.0 mm T6 Torx硬盘固定住。

将固定住安装在新的硬盘上。

如有需要请将就硬盘上粘的拉手也贴到新的硬盘上。

如果您安装新的硬盘,请参阅我们的指南安装Mac OS X 10.5 Leopard 安装系统。

在开源创作共享许可协议下,你的投稿已被许可