跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo Phillips #0 screwdriver.
  • On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo Phillips #0 screwdriver.

  • Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可