跳转到主内容
英语
荷兰语

正翻译步骤 4

步骤 4
Remove the three 8.4 mm #1 Phillips screws securing the heat sink to the logic board. Don't lose the springs held under each of the screws.
  • Remove the three 8.4 mm #1 Phillips screws securing the heat sink to the logic board.

  • Don't lose the springs held under each of the screws.

  • Carefully remove the heat sink from the processor.

  • If the heat sink seems to be stuck, it may be helpful to gently pry it off the processor with a plastic spudger. Be careful not to break any surface mount components on the processor while prying.

  • Be sure to clean off the old thermal paste and apply a new layer before you reinstall the heat sink. We have a guide that makes it easy.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可