跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的81本指南

英语
中文

正翻译步骤 10

步骤 10
While the opening tool cut most of the adhesive, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive. Set the iMac face-up on a table. Starting from the top right corner of the iMac, wedge a plastic card between the display and frame.
  • While the opening tool cut most of the adhesive, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, wedge a plastic card between the display and frame.

  • Be careful not to insert the plastic card more than 3/8", or you may damage internal components.

虽然开启工具切除了大部分的黏合剂,但显示器的些许的黏合剂还是会黏在外壳。塑胶卡是最后分离粘合剂的必要工具。

将iMac放置桌面并朝上

请注意不要将塑胶卡插入超过3/8英吋(约0.375英寸, 约1公分),否则可能会损坏内部组件

在开源创作共享许可协议下,你的投稿已被许可