跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 1

步骤 1
Before you begin, turn off your phone. Heat an iOpener and apply it to the left edge of the phone for two minutes.
Heat the screen
  • Before you begin, turn off your phone.

  • Heat an iOpener and apply it to the left edge of the phone for two minutes.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.

  • As you wait, take note of the the following areas:

  • Display cable—be careful not to slice too deeply near the edge here, or you may damage the display cable.

  • Fingerprint sensor cable—be careful not to slice too deeply near the edge here, or you may damage the fingerprint sensor cable.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可