注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
Be careful not to touch the three rows of grounding pads near the bottom of the iPhone. Remove the seven screws securing the bracket below the Taptic Engine and speaker:
  • Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.

  • Remove the seven screws securing the bracket below the Taptic Engine and speaker:

  • Two Y000 1.9 mm screws

  • One Y000 1.2 mm screw

  • One Y000 1.6 mm screw

  • One Phillips 2.4 mm screw

  • One Phillips 1.7 mm screw

  • One Phillips 1.5 mm screw

移除Taptic Engine和扬声器上方的金属保护罩上的7颗螺丝:

两颗1.9mm Y000型螺丝

一颗1.2mm Y000型螺丝

一颗1.6mm Y000型螺丝

一颗2.4mm 十字螺丝

一颗1.7mm 十字螺丝

一颗1.5mm 十字螺丝

[* icon_caution] Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.
[*
black] Remove the seven screws securing the bracket overbelow the Taptic Engine and speaker:
[* redorange] Two Y000 1.9 mm screws
[* orangeyellow] One Y000 1.2 mm screw
[* yellowgreen] One Y000 1.6 mm screw
[* greenlight_blue] One Phillips 2.4 mm screw
[* light_blueblue] One Phillips 1.7 mm screw
[* blueviolet] One Phillips 1.5 mm screw
[* icon_caution] Be careful not to touch the three rows of grounding pads near the bottom of the iPhone.
[*
black] Remove the seven screws securing the bracket overbelow the Taptic Engine and speaker:
[* redorange] Two Y000 1.9 mm screws
[* orangeyellow] One Y000 1.2 mm screw
[* yellowgreen] One Y000 1.6 mm screw
[* greenlight_blue] One Phillips 2.4 mm screw
[* light_blueblue] One Phillips 1.7 mm screw
[* blueviolet] One Phillips 1.5 mm screw

在开源创作共享许可协议下,你的投稿已被许可