跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 1

步骤 1
Remove five Y000 screws securing the logic board connector bracket, of the following lengths:
  • Remove five Y000 screws securing the logic board connector bracket, of the following lengths:

  • Three 1.1 mm screws

  • One 3.1 mm screw

  • One 3.7 mm screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

拧出固定逻辑板支架的5个符合以下长度Y000规格的螺丝

3个1.1mm的螺丝

1个3.1mm的螺丝

1个3.7mm的螺丝

做这步的时候,注意记住每个螺丝位置并在安装的时候准确的拧回去,因为这保护你的摄像头不被破坏。

在开源创作共享许可协议下,你的投稿已被许可