注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 8

步骤 8
The top edge of the display is secured with both glue and clips. Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port. The clips will break if you use too much force. Work carefully and be patient.
  • The top edge of the display is secured with both glue and clips.

  • Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

  • The clips will break if you use too much force. Work carefully and be patient.

  • Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.

  • Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

沿着iPhone的顶部边沿滑动显示器下方,松开最后一个区域的粘合剂。

请勿将撬片插入显示屏挡板。 如果这样做,可能会损坏前面板传感器阵列。

屏幕的上边缘可能难以分开。 如有必要,反复切割粘合剂,轻轻摆动显示器,直到松动。

[* icon_note] The top edge of the display is secured with both glue and clips.
[*
black] Slide the opening pick underneath the display alongaround the top edgecorner of the iPhone to loosendisplay, while gently pulling or wiggling the lastdisplay '''''down''''' in the direction of the adhesiveLightning port.
[* icon_caution] The clips will break if you use too much force. Work carefully and be patient
.
[* icon_caution] Don'tAgain, don't insert the pick pastmore than a few millimeters—about the width of the display bezel here either. There is potential tobezel—or you may damage the front panel sensor array if you do.
[* icon_note] The top edge of
array.
[* black] Slide
the screen may be difficultpick to separate. If necessary, slice the opposite corner and cut any remaining adhesive repeatedly and gently wigglesecuring the display until it starts to come freedisplay.
[* icon_note] The top edge of the display is secured with both glue and clips.
[*
black] Slide the opening pick underneath the display alongaround the top edgecorner of the iPhone to loosendisplay, while gently pulling or wiggling the lastdisplay '''''down''''' in the direction of the adhesiveLightning port.
[* icon_caution] The clips will break if you use too much force. Work carefully and be patient
.
[* icon_caution] Don'tAgain, don't insert the pick pastmore than a few millimeters—about the width of the display bezel here either. There is potential tobezel—or you may damage the front panel sensor array if you do.
[* icon_note] The top edge of
array.
[* black] Slide
the screen may be difficultpick to separate. If necessary, slice the opposite corner and cut any remaining adhesive repeatedly and gently wigglesecuring the display until it starts to come freedisplay.

在开源创作共享许可协议下,你的投稿已被许可