跳转到主内容
英语
西班牙语

正翻译步骤 4

步骤 4
Make sure the vibration motor is not adhered to the phone, then gently lift the charging assembly out of the the phone, lifting the motor out at the same time.
  • Make sure the vibration motor is not adhered to the phone, then gently lift the charging assembly out of the the phone, lifting the motor out at the same time.

  • Remove the microphone board and transfer it to the new charging assembly.

  • If you wish to remove the vibration motor, you have to desolder its wires from the charging assembly board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可