跳转到主内容
英语
德语

正翻译步骤 4

步骤 4
Make sure the vibration motor is not adhered to the phone, then gently lift the charging assembly out of the the phone, lifting the motor out at the same time.
  • Make sure the vibration motor is not adhered to the phone, then gently lift the charging assembly out of the the phone, lifting the motor out at the same time.

  • Remove the microphone board and transfer it to the new charging assembly.

  • If you wish to remove the vibration motor, you have to desolder its wires from the charging assembly board.

Kontrolliere nochmals, ob der Vibrationsmotor nicht am Smartphone befestigt ist. Hebe dann die Ladeeinheit vorsichtig aus dem Smartphone heraus, wobei du auch den Vibrationsmotor mit hochhebst.

Wenn du den Vibrationsmotor ausbauen willst, dann musst du seine Anschlusskabel von der Ladeeinheit ablöten.

[* black] Make sure the vibration motor is not adhered to the phone, then gently lift the charging assembly out of the the phone, lifting the motor out at the same time.
+[* black] Remove the [link|https://guide-images.cdn.ifixit.com/igi/4DlXVg2k5x2oB3CU.full|microphone board|new_window=true] and transfer it to the new charging assembly.
[* icon_note] If you wish to remove the vibration motor, you have to desolder its [https://d3nevzfk7ii3be.cloudfront.net/igi/oUHZuBaR2L4WdvjF.full|wires|new_window=true] from the charging assembly board.

在开源创作共享许可协议下,你的投稿已被许可