跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Use an iOpener near the top edge of the display assembly to heat and soften the adhesive on the piece of tape holding the thermal sensor in place.
  • Use an iOpener near the top edge of the display assembly to heat and soften the adhesive on the piece of tape holding the thermal sensor in place.

  • Instructions on how to properly heat and use the iOpener can be found here.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可