跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 2

步骤 2
Insert a Jimmy or other metal tool between the right side of the plastic display and the metal frame, near the phone's side buttons. This may require a considerable amount of force. Push the tool as far down into the gap as you can, taking care to not scratch the chassis of your device in the process. Tilt the Jimmy downward while continuing to push it deeper into the gap to pry up the right side of the screen assembly.
Release the Screen Assembly
  • Insert a Jimmy or other metal tool between the right side of the plastic display and the metal frame, near the phone's side buttons.

  • This may require a considerable amount of force. Push the tool as far down into the gap as you can, taking care to not scratch the chassis of your device in the process.

  • Tilt the Jimmy downward while continuing to push it deeper into the gap to pry up the right side of the screen assembly.

  • Since the display on top of the screen assembly is flexible and only attached with a slight amount of adhesive, you may end up prying up only the display instead of lifting the entire assembly. If this occurs, remove the tool and try again, this time using more downward force to get underneath the entire assembly.

  • Ensure your tool is behind the entire screen assembly and not just the display. If done correctly, you should notice the thin silver metal midframe come up with the plastic display (as pictured).

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可