iPad 3 4G版前面板的移除

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的153本指南。

英语

中文

正翻译步骤 15

步骤 15

Continue releasing the adhesive along the bottom of the iPad, pulling the opening pick out far enough to go around the home button, and re-inserting it to a depth of 1/2 inch (10 mm) once the pick is past the home button.
If the adhesive has cooled too much along the bottom edge, reheat the iOpener to warm the adhesive where you are working.
Do not heat the iOpener more than a minute at a time, and always allow at least two minutes before reheating it.