注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。
正翻译步骤 2
步骤 2
-
Place the prying tool beneath the 4 wires on the end of the connector and gently pry the speaker cable connector straight up from its socket on the logic board. Do not pry from the opposite end of the connector as this will break the 4 solder points on the underside of the socket and will require a microsolder repair.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。