跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
Use an 8 mm bit driver to remove the four hex bolts from around the perimeter of the boiler (only two are shown). Remove the 2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the Barista.
  • Use an 8 mm bit driver to remove the four hex bolts from around the perimeter of the boiler (only two are shown).

  • Remove the 2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the Barista.

  • At this point, the boiler is free from the Barista and can be removed.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可