跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Use a wrench to remove the boiler hose from the pressure release valve. Remove the two slotted screws securing the pump brackets to the frame of the Barista. The simple angled rubber pump brackets are designed to absorb vibration from the reciprocating pump.
  • Use a wrench to remove the boiler hose from the pressure release valve.

  • Remove the two slotted screws securing the pump brackets to the frame of the Barista.

  • The simple angled rubber pump brackets are designed to absorb vibration from the reciprocating pump.

  • Disconnect the two female AC power spade connectors from the pump and slip the thermal fuse out from its holder on the body of the pump.

  • The thermal fuse is a normally closed protective switch that opens the circuit once the pump has reached a critical temperature, thus shutting it down before the coil melts.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可