修复你的物品

维修的权力

商店

注：你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 9

步骤 9
If you successfully removed the entire ambient light sensor, as shown in the first photo, continue to the next step below. If the white diffuser strip detached and remains embedded in the display, as shown in the second photo, you will need to carefully lever it out along the top edge using a thin blade or pry tool. Re-applying heat first may make this task a bit easier. During reassembly, install the diffuser into the display first, making sure it faces the right direction (the front-facing side is shown in the first image, and the rear-facing side is shown in the third).

  • If you successfully removed the entire ambient light sensor, as shown in the first photo, continue to the next step below.

  • If the white diffuser strip detached and remains embedded in the display, as shown in the second photo, you will need to carefully lever it out along the top edge using a thin blade or pry tool. Re-applying heat first may make this task a bit easier.

  • During reassembly, install the diffuser into the display first, making sure it faces the right direction (the front-facing side is shown in the first image, and the rear-facing side is shown in the third).

  • Then, set the ambient light sensor on top of the diffuser. You will need to hold the sensor in position while installing the screws securing the earpiece/sensor assembly. Once the screws are tightened, the sensor will stay in place and work normally.

如果您成功的移除了整个环境光感应器（如图一所示），请继续下一步。

如果传感器上的白色柔光条脱落并残留在屏幕上（如图二所示），您需要使用一个薄的刀片或撬棒从屏幕的上缘小心地将其撬出。提前重新加热可能会使其更容易操作。

重新组装的过程中，请先将柔光条安装到屏幕上，确保其面对正确的方向（朝前的一面如图一所示，朝后的一面如图三所示）。

然后将环境光感应器安装到柔光条上。当您安装固定听筒+传感器组的螺丝时您需要保持住传感器正确的位置。当螺丝拧紧时，传感器就会固定到正确的位置并能正常工作。

在开源创作共享许可协议下，你的投稿已被许可。