修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南。

返回指南
英语
中文
上一步

正翻译步骤 10

步骤 10
Open the iPhone by swinging the display up from the left side, like the back cover of a book. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board. As pictured, make sure the frame comes off with display and doesn't get stuck in the device.

  • Open the iPhone by swinging the display up from the left side, like the back cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • As pictured, make sure the frame comes off with display and doesn't get stuck in the device.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

从iPhone显示屏的左侧向上打开iPhone，就像面对书本底部时，翻开最后一页一样。

不要试图将屏幕和手机完全分开，因为几条易碎的连接线任然与iPhone的控制板连接着。

如图所示，保证屏幕的框架也和屏幕一起拆开，而不是还卡在手机里。

在重新组装过程中，将显示器放置到位，沿着顶部边缘对齐夹子，然后小心地将顶部边缘压入到位，然后将其余部分向下收紧。 如果不能轻松安装到位，请检查显示器周边的夹子状况，确保它们没有弯曲。

在开源创作共享许可协议下，你的投稿已被许可。