跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 7

步骤 7
Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module. Gently wiggle and lift to separate the module from its notch in the front panel. It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.
  • Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module.

  • Gently wiggle and lift to separate the module from its notch in the front panel.

  • It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.

使用一个三角拨片在排线和距离感应器+泛光感应元件下从左往右划动。

轻轻摆动并提拉模组来将其与前面板上的开孔分离。

提起听筒有助于上面的操作。注意不要使排线受到很大拉力。

在开源创作共享许可协议下,你的投稿已被许可