跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 6

步骤 6
Carefully slide the flat edge of your spudger underneath the flex cable below the microphone. Twist gently to separate the microphone, while being careful not to strain or damage the flex cable. If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel.
  • Carefully slide the flat edge of your spudger underneath the flex cable below the microphone.

  • Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.

  • If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel.

使用撬棒的平直端小心的在麦克风下的排线的下面划动。

轻轻转动撬棒来将麦克风分离,小心不要损坏排线。

如果需要的话,使用撬棒的尖端将麦克风从前面板上的圆形切口中分离。

在开源创作共享许可协议下,你的投稿已被许可