跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 5

步骤 5
Insert an opening pick into the right edge of the phone and slide it upwards towards the top right clip. You do not need to insert the pick more than 2 mm into the edge. If you insert the pick all the way in, you may risk damaging flex cables.
  • Insert an opening pick into the right edge of the phone and slide it upwards towards the top right clip.

  • You do not need to insert the pick more than 2 mm into the edge. If you insert the pick all the way in, you may risk damaging flex cables.

  • Slowly slide the pick past the clip to disengage it from the frame.

  • At this point, the right edge of the midframe should be free from the case. If it isn't, slide an opening clip up and down along the right edge.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可