跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 4

步骤 4
Remove the four screws on the underside of the receiver with a 2mm hex driver. Pull the barrel assembly out of the receiver. Remove the two screws holding the hop-up unit in place.
  • Remove the four screws on the underside of the receiver with a 2mm hex driver.

  • Pull the barrel assembly out of the receiver.

  • Remove the two screws holding the hop-up unit in place.

  • Pull the inner barrel out of the outer barrel.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可