跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 16

步骤 16
The next task is to remove the fake bolt. Start by removing the C clip as shown. you may need to use a pick to pry it off.
  • The next task is to remove the fake bolt.

  • Start by removing the C clip as shown. you may need to use a pick to pry it off.

  • After the clip is remove slide the fake bolt all the way back. With the bolt in the rear position press the fake bolt parts that still attached slightly up.

  • Use a pick to pry the bolt linking section out of the blow back cylinder on both sides.

  • Careful not too bend the fake bolt as it can harm its functionality.

  • Next remove the retaining strap by using a punch in the little notch shown in Yellow and punch off the retaining strap off the back of the gearbox.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可