跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky. Use a tweezer to loosen the glued in vibration motor and remove it. If you're having a hard time while removing the loudspeaker or the vibration motor you can use an iOpener to loosen the adhesive and try it again.
  • Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky.

  • Use a tweezer to loosen the glued in vibration motor and remove it.

  • If you're having a hard time while removing the loudspeaker or the vibration motor you can use an iOpener to loosen the adhesive and try it again.

  • Before reassembly check your new part for any components that might need to be transferred from the old one.

  • When reassembling your phone, replace old adhesive with stretch release adhesive strips, double-sided tape, or pre-cut adhesive strips.

使用撬棒取下扬声器和充电端口。下面有一些粘合剂,可能会有点粘。

使用镊子松开粘合的震动电机并将其取下。

如果你在取下扬声器或震动马达时遇到困难,可以使用iOpener软化粘合剂并再次尝试。

在重新组装之前,请检查新零件是否有可能需要从旧手机上转移。

重新组装手机时,请使用双面胶带或预先切割的胶条替换旧胶粘剂。

在开源创作共享许可协议下,你的投稿已被许可