跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 1

步骤 1
Remove the four Y000 screws securing the bracket over the home/Touch ID sensor: One 1.2 mm screw
Remove the home/Touch ID sensor bracket
  • Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:

  • One 1.2 mm screw

  • Three 1.3 mm screws

  • Remove the bracket.

  • During reassembly, be careful not to overtighten these screws, or your home button may not work.

移除 home键/Touch ID传感器 后的支架上的四个Y型螺丝。

一个1.2mm螺丝

三个1.3mm螺丝

重新组装时,请注意不要拧得太紧,否则Home 键可能不起作用。

[title] Remove the home/Touch ID sensor bracket
[* black] Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
[* red] One 1.2 mm screw
[* orange] Three 1.3 mm screws
[* black] Remove the bracket.
[* icon_reminder] During reassembly, be careful not to overtighten these screws, or your home button may not work.

在开源创作共享许可协议下,你的投稿已被许可