翻译步骤＃6 - 360fly 4K Battery Replacement - iFixit

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。

英语

中文

上一步

正翻译步骤 6

步骤 6

Remove the five 4mm T4 screws around the battery assembly with a t4 crew driver.

Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool.

Press the battery from the back of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.

Remove the five 4mm T4 screws around the battery assembly with a t4 crew driver.
Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool.
Press the battery from the back of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.
Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.

在开源创作共享许可协议下，你的投稿已被许可。