Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 6

Step 6
Remove the five 4mm T4 screws around the battery assembly with a t4 crew driver. Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool. Press the battery from the back  of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.
  • Remove the five 4mm T4 screws around the battery assembly with a t4 crew driver.

  • Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool.

  • Press the battery from the back of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.

  • Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可