跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的12本指南

英语
中文

正翻译步骤 1

步骤 1
Use the tip of a spudger or a fingernail to disconnect the large lower display connector by prying it straight up from its socket. To re-attach press connectors like this one, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.
  • Use the tip of a spudger or a fingernail to disconnect the large lower display connector by prying it straight up from its socket.

  • To re-attach press connectors like this one, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.

使用撬棒的尖端或者手指甲来直接将插头从插座中撬出来断开大的低显示排线。

在重新连接类似这个按压连接插头时,现将一侧完全按压到位,然后再操作另一侧。 切勿在插头中间按压。 如果连接插头产生微小的错位,连接插头可能被折弯,造成永久的损伤。

在开源创作共享许可协议下,你的投稿已被许可