跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的12本指南

英语
中文

正翻译步骤 1

步骤 1
Remove four Phillips (JIS) screws securing the lower display cable bracket to the logic board, of the following lengths: Two 1.3 mm screws
Battery Disconnection
  • Remove four Phillips (JIS) screws securing the lower display cable bracket to the logic board, of the following lengths:

  • Two 1.3 mm screws

  • One 1.4 mm screw

  • One 2.7 mm screw

  • Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

移除四颗将显示排线支架与逻辑板相固定的十字(JIS) 螺丝:

2颗 1.3mm 螺丝

1颗 1.4mm 螺丝

1颗 2.7mm 螺丝

[title] Battery Disconnection
[* black] Remove the fourfour Phillips (JIS) screws securing the lower display cable bracket to the logic boardboard, of the following lengths:
[* black] Remove the fourfour Phillips (JIS) screws securing the lower display cable bracket to the logic boardboard, of the following lengths:
[* red] Two 1.3 mm screws
[* orange] One 1.4 mm screw
[* yellow] One 2.7 mm screw
[* icon_reminder] Throughout this guide, [product|IF145-167-4|keep careful track of your screws] so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

在开源创作共享许可协议下,你的投稿已被许可