跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 4

步骤 4
Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
  • Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.

  • Flip the display assembly over. Use a hairdryer or prepare an iOpener and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.

  • Don't overheat the display. It should be slightly too hot to touch comfortably.

加热 Home 键附近的区域,这是为了软化用于固定排线的粘合胶以便更好地将其移除。

将屏幕翻转。用吹风机或一个 加热过的 iOpener 加热屏幕底部约 90 秒以软化底部的粘合胶。

不要让屏幕过热。温度应以无法舒适地触摸为宜。

在开源创作共享许可协议下,你的投稿已被许可