跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the four Y000 screws securing the bracket over the home/Touch ID sensor: One 1.2 mm screw
  • Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:

  • One 1.2 mm screw

  • Three 1.3 mm screws

  • During reassembly, be careful not to overtighten these screws, or your home button may not work.

移除 Home 键与 Touch ID 传感器支架上的四颗 Y000 螺丝。

一颗 1.2mm 螺丝

三颗 1.3mm 螺丝

[* black] Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
[* red] One 1.2 mm screw
[* orange] Three 1.3 mm screws
[* icon_reminder] During reassembly, be careful not to overtighten these screws, or your home button may not work.

在开源创作共享许可协议下,你的投稿已被许可