跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的13本指南

英语
中文

正翻译步骤 3

步骤 3
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick or other thin pry tool a few millimeters into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick or other thin pry tool a few millimeters into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

用力拉动吸盘,持续的压力将会在前面板和后壳之间创造出一个小的缝隙。

在缝隙里插入撬棒或者其他几毫米的撬动工具

将显示器固定到位的防水粘合剂非常牢固; 弄开这个缝隙需要很大的力量。 如果你很难打开一个缝隙,应继续加热手机,并上下轻轻晃动屏幕,以削弱粘合剂,直到你能够打开足够大缝隙插入你的工具。

在开源创作共享许可协议下,你的投稿已被许可