Fix Your Stuff

Right to Repair

Parts & Tools

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 5

步骤 5
Re-insert your tool at the lower right corner of the iPhone, and slide it around the corner and up the right side of the phone to separate the adhesive. Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel. Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel.

  • Re-insert your tool at the lower right corner of the iPhone, and slide it around the corner and up the right side of the phone to separate the adhesive.

  • Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel.

将您的工具重新插入到iPhone的右下角，并将其划到手机右上角，以划开粘合剂。

请勿将拨片插入很深，否则可能会损坏iPhone的这一侧的显示屏排线。 只需将其插入几毫米，即显示屏边缘的凹槽的宽度即可。

在开源创作共享许可协议下，你的投稿已被许可。