翻译步骤＃5 - G&G CM16 Carbine Airsoft Disassembly - iFixit

取消

英语

中文

上一步下一步

正翻译步骤 5

步骤 5

Remove the stock by lifting the adjustment lever as shown while simultaneously sliding it backwards, off of the buffer tube.

Use a #2 Phillips screwdriver to remove the single screw at the rear underside of the buffer tube.

Use a #2 Phillips screwdriver to remove the single screw at the rear underside of the buffer tube.

Remove the stock by lifting the adjustment lever as shown while simultaneously sliding it backwards, off of the buffer tube.
Use a #2 Phillips screwdriver to remove the single screw at the rear underside of the buffer tube.

在开源创作共享许可协议下，你的投稿已被许可。