跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 1

步骤 1
Use the flat end of a spudger to free the adhesive loop securing the I/O board power cable to the upper case. Disconnect the I/O board by pulling the power cable away from its socket on the logic board.
  • Use the flat end of a spudger to free the adhesive loop securing the I/O board power cable to the upper case.

  • Disconnect the I/O board by pulling the power cable away from its socket on the logic board.

  • Pull the cable parallel to the face of the logic board toward the front edge of the Air.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可