跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 5

步骤 5
Heat the bottom edge with an iOpener for two minutes. Insert a pick near the right edge where you have already loosened the adhesive.
  • Heat the bottom edge with an iOpener for two minutes.

  • Insert a pick near the right edge where you have already loosened the adhesive.

  • Carefully guide the pick around the corner.

  • Slide the pick along the bottom edge to slice through the adhesive.

  • Do not slice deeper than 8.5 mm (1/3") or you will damage the display cable.

用iOpener加热屏幕底部约2分钟

在已经切开的边缘处插入一个撬片

小心的将撬片划过转角

将撬片划像另一侧,并切开底部的屏幕胶

不要将撬片插入超过8.5mm(1/3“),否则将有可能损坏屏幕

译注:这部分的屏幕胶比顶部略少,但是依旧很多,根据实际情况,加热时间可能远超2分钟,务必加热完全再进行操作

在开源创作共享许可协议下,你的投稿已被许可