跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 4

步骤 4
Heat an iOpener and apply it to the right edge of the phone for two minutes. Insert an opening pick near the top edge of the phone, where you have already sliced the adhesive. Slowly guide the pick around the right corner.
  • Heat an iOpener and apply it to the right edge of the phone for two minutes.

  • Insert an opening pick near the top edge of the phone, where you have already sliced the adhesive.

  • Slowly guide the pick around the right corner.

  • Carefully slide the pick down the right edge of the phone to slice through the adhesive.

  • Do not insert the pick more than 1 mm (1/32") along the edge, or you will damage the display assembly.

  • Repeat the step for the left edge of the phone.

用iOpener加热屏幕一侧边缘约两分钟

在已经打开的缝隙中再插入一个撬片,沿着加热过的边缘小心地从上往下滑动,慢慢切开屏幕胶水

注意不要将撬片插入边缘超过1mm(1/32"),不然可能导致屏幕组件的损坏

在屏幕的另一侧重复以上步骤

在开源创作共享许可协议下,你的投稿已被许可