简介

The speaker is located inside the phone underneath the front cover. A T6 screwdriver is needed to access the speaker.

配件

无需配件。

Press down the button on the back panel.
  • Press down the button on the back panel.

添加评论

Push the back cover upwards.
  • Push the back cover upwards.

添加评论

  • Remove the back cover from the phone.

添加评论

  • Press the silver button on the top of the phone.

添加评论

  • Pull the top of the case apart.

  • Slide thumbnail down the case seam to separate the rest of the case.

添加评论

  • Gently pull the case apart.

  • Careful! Do not to bend the plastic tabs.

添加评论

  • Using a T6 Torx Screwdriver, unscrew and remove the six screws shown in the picture.

添加评论

  • Remove the panel that covers the motherboard.

  • If replacing the speaker, stop at this step and skip forward to the first step of the speaker guide.

添加评论

  • Remove the LCD screen frame.

添加评论

  • Remove the motherboard.

添加评论

  • Locate the speaker on the back of the removed panel.

添加评论

  • Use nails to gently lift the speaker up; speaker may be slightly glued to the panel.

添加评论

  • When the speaker is loose, gently lift the speaker out of the panel.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Job Jao

于2010年10月08日注册

37 信誉积分

创作了2篇指南

团队

Cal Poly, Team 3-27, Regan Fall 2010 Cal Poly, Team 3-27, Regan Fall 2010 的会员

CPSU-REGAN-F10S3G27

4 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 2,498