简介

This guide will teach the process of unseating the motherboard from the iRulu AX760, whether to replace the motherboard or simply to get to the screen. These steps are reversible to re-seat the motherboard.

  1. Use a plastic opening tool or metal spudger to free the rear cover.
    • Use a plastic opening tool or metal spudger to free the rear cover.

    • Insert your spudger into the side of your tablet.

    • Crack open each edge and remove the cover.

    添加评论

  2. Open your tablet.
    • Open your tablet.

    添加评论

    • Take your plastic flat head tool and insert it under the battery.

    • Lift the battery up.

    • Make sure to remove any tape from the battery.

    添加评论

    • Use a soldering iron to remove the solder that connects the black and red wires of the battery to the motherboard.

    • Keep the wires of the battery taught.

    • The iron should only be pressed to the solder for 2-3 seconds max.

    • Be very carful, the soldering iron will be very hot!

    • Visit this link for information about soldering. 如何焊接和脱焊

    添加评论

    • Remove your old battery and replace it with the new battery.

    添加评论

    • There are two thin adhesive strips under the battery that run vertically along the left and right side.

    • Carefully wedge a plastic card or spudger under the battery and along both adhesive strips. Gently work the card or spudger up and down to free the battery.

      • Do not use metal tools, and do not bend or puncture the battery.

    添加评论

    • WARNING: SOLDERING IRONS BECOME EXTREMELY HOT. DO NOT TOUCH

    • For information on soldering and desoldering, check this link.

    • You must desolder several sets of contacts before attempting to remove the motherboard.

    • You must desolder the BAT (battery), LED, SPK (speaker), and ANT (antenna) contacts.

    添加评论

    • Unscrew the motherboard from the screen with the JIS #000 Screwdriver, a Phillips-head type screwdriver

    添加评论

    • Use a plastic spudger to push the tab, releasing the motherboard from the screen. You can now remove the old motherboard.

    • You will not need a metal spudger in order to re-place the motherboard

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Adam Schubach

于2018年03月20日注册

123 信誉积分

撰写一个指南

团队

IUPUI, Team S6-G4, Baechle Spring 2018 IUPUI, Team S6-G4, Baechle Spring 2018 的会员

IUPUI-BAECHLE-S18S6G4

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 4

总计 48